How to Enable VT in GIGABYTE BIOS for LDPlayer
GIGABYTE motherboards and prebuilt computers keep the virtualization option in different BIOS menus. This guide covers both paths, so you can enable VT on either type of system.
Before You Start
Prerequisites: Save your open work in Windows. The computer restarts during this process.; Find out whether your processor is Intel or AMD. Press Ctrl+Shift+Esc to open Task Manager, select the **Performance** tab, then select **CPU**. The processor name appears there.; Back up files you cannot replace. Changing the wrong BIOS setting can cause startup problems.
Step-by-Step
- Restart the computer.
- Press the key shown on screen repeatedly. If no key is shown, press Del repeatedly.
- Open BIOS Features.
- Find Intel Virtualization Technology.
- Change it from Disabled to Enabled.
- Save the change with F10.
- Exit the BIOS.
- Restart the computer.
- Press Del repeatedly to open the BIOS.
- Open M.I.T. > Advanced Frequency Settings > Advanced CPU Core Settings.
- Find SVM Mode.
- Change SVM Mode from Disabled to Enabled.
- If Advanced CPU Core Settings shows many Auto items, open Chipset instead.
- In Chipset, change Intel Virtualization Technology (VT-x) from Disabled to Enabled.
- Save the change with F10.
- Exit the BIOS.
## Overview GIGABYTE motherboards and prebuilt computers keep the virtualization option in different BIOS menus. This guide covers both paths, so you can enable VT on either type of system.
Find out which type you have first. A motherboard is a part you install yourself. A prebuilt computer is a complete system from a manufacturer, and its BIOS menus often differ.
## What to expect After you save and exit, the computer restarts into Windows. Nothing else should change.
To confirm the setting, press Ctrl+Shift+Esc to open Task Manager, select the Performance tab, then select CPU. The Virtualization line should read Enabled. Then open LDPlayer. If it starts without a virtualization warning, the setting is working.
## Why this works LDPlayer runs Android inside a virtual machine. Hardware virtualization lets the processor run that virtual machine efficiently. The setting lives in the BIOS or UEFI firmware, which loads before Windows starts, so Windows usually cannot change it for you.
## Common mistakes
- Pressing the BIOS key after the Windows logo appears. Restart and start pressing the key earlier.
- Changing a different item, such as a boot or security option. Change only the virtualization item.
- Using the Intel item on an AMD processor, or the reverse. Check your processor first.
- Exiting without saving. Press F10 and confirm before you exit.
## Security note
- Risk: Virtualization is a hardware feature in the BIOS. Turning it on does not disable Windows security features. It does make the processor’s virtualization features available to software on the PC, so leave it on only if you use LDPlayer or other virtualization software.
- How to revert: Restart, open the BIOS, set the virtualization item back to Disabled, press F10, and save. LDPlayer and other virtualization software will not start until you enable it again.
## Notes and Troubleshooting
- If your processor is an AMD CPU on a GIGABYTE motherboard, open M.I.T. > Advanced Frequency Settings > Advanced CPU Core Settings and change SVM mode to Enabled. Then save with F10.
- The menu paths differ between motherboards and prebuilt systems. Use the path that matches your hardware.
- If LDPlayer still reports a virtualization error after the change, check the troubleshooting entries in the Related list.
## Related